SMA
2" BANJO BALL VALVE FULL PORT
SKU: 909-V200FP
2 Thread, 2 Ball Opening, 100 PSI @ 70 F
In stock, 430 units
2 Thread, 2 Ball Opening, 100 PSI @ 70 F
Sale price$88.83
SMA
2" BANJO BALL VALVE NOZZLE
SKU: 909-VA200
2 Thread, 1-1/2 Ball Opening, 100 PSI at 70 F
In stock, 26 units
2 Thread, 1-1/2 Ball Opening, 100 PSI at 70 F
Sale price$78.04
SMA
2" BANJO GASKET EXTRA THICK
SKU: 909-200GXT
2 Inch Extra Thick Coupler Gasket-EPDM
In stock, 147 units
2 Inch Extra Thick Coupler Gasket-EPDM
Sale price$2.59
SMA
2" BLACK POLY HOSE MENDER
SKU: 909-HM200
Banjo Hm-200 2" X 2" Poly Hose Menders
In stock, 207 units
Banjo Hm-200 2" X 2" Poly Hose Menders
Sale price$5.67
SMA
2" BLACK POLY PIPE CAP
SKU: 909-CAP200
This Banjo CAP200 cap is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The cap fitting closes or terminates the end of a pipe or fitting. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 23 units
This Banjo CAP200 cap is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The cap fitting closes or terminates the end of a pipe or fitting. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$12.01
SMA
2" BLACK POLY PIPE COUPLING
SKU: 909-CPLG200
This Banjo CPLF200 coupling is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The coupling fitting connects two pipes with the same diameter going in the same direction to extend a straight run. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 195 units
This Banjo CPLF200 coupling is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The coupling fitting connects two pipes with the same diameter going in the same direction to extend a straight run. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$13.23
SMA
2" BLACK POLY PIPE CROSS
SKU: 909-CR200
This Banjo CR200 cross is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 68 units
This Banjo CR200 cross is a schedule 80 polypropylene pipe fitting with 2 inch female NPT threads. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$36.87
SMA
2" BLACK POLY PIPE TEE
SKU: 909-TEE200
This Banjo TEE200 tee is a schedule 80 polypropylene pipe fitting with three 2 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 189 units
This Banjo TEE200 tee is a schedule 80 polypropylene pipe fitting with three 2 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$14.73
SMA
2" CAST IRON PUMP NEW DESIGN
SKU: 909-222PIH5
Banjo 222PIH5 2 inch Cast Iron Self-Priming Pump with 5.5 HP Honda Engine. Pump Features: Cast iron construction for rugged dependable service. Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Pump end separated from engine. Heavy duty slinger seal on motor shaft. Large weep holes between pump end and engine. V Shaped for quicker priming. Honda Engine Features: GX Series commercial grade. Legendary reliability/durability. Powerful Overhead Valve (OHV). 2-year commercial and homeowner warranty. Industrial 2-stage air filter. Quiet, easy starting. Oil alert. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
In stock, 24 units
Banjo 222PIH5 2 inch Cast Iron Self-Priming Pump with 5.5 HP Honda Engine. Pump Features: Cast iron construction for rugged dependable service. Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Pump end separated from engine. Heavy duty slinger seal on motor shaft. Large weep holes between pump end and engine. V Shaped for quicker priming. Honda Engine Features: GX Series commercial grade. Legendary reliability/durability. Powerful Overhead Valve (OHV). 2-year commercial and homeowner warranty. Industrial 2-stage air filter. Quiet, easy starting. Oil alert. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sale price$1,326.17
SMA
2" CHIP BRUSH
SKU: 137-16022
2" Chip Brush with white bristles and plain wood handle - 5/16" thick - 1 1/2" long - Order of multiples of 24.
In stock, 751 units
2" Chip Brush with white bristles and plain wood handle - 5/16" thick - 1 1/2" long - Order of multiples of 24.
Sale price$0.82
SMA
2" CHROME BALL MOUNT KIT 3/PKG
SKU: 957-1803306
Includes Chrome Ball mount with 2 " Ball,Hitch pin and cotter.Fits 2" receiver tubes. 6000lbs cap. 5000lb Chrome Ball.2" Drop
In stock, 43 units
Includes Chrome Ball mount with 2 " Ball,Hitch pin and cotter.Fits 2" receiver tubes. 6000lbs cap. 5000lb Chrome Ball.2" Drop
Sale price$38.99
SMA
2" CLOSE BLACK POLY NIPPLE
SKU: 909-NIP200SH
Banjo NIP200SH Pipe Nipple, Pipe Size 2" Connection MPT, Color Black, Temp. Range -20 to 150 Deg F, Length Short, Material of Construction Polypropylene, Max. Pressure 150 at 70 Deg F, PSI Schedule 80.
In stock, 721 units
Banjo NIP200SH Pipe Nipple, Pipe Size 2" Connection MPT, Color Black, Temp. Range -20 to 150 Deg F, Length Short, Material of Construction Polypropylene, Max. Pressure 150 at 70 Deg F, PSI Schedule 80.
Sale price$4.60
SMA
2" EPDM GASKET BANJO
SKU: 909-200G
Gasket, Size 2 Inch, Material of Construction EPDM, Max Pressure 125 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meets ASTMC 38000 and MIL-C-27487F specifications.
In stock, 1740 units
Gasket, Size 2 Inch, Material of Construction EPDM, Max Pressure 125 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meets ASTMC 38000 and MIL-C-27487F specifications.
Sale price$1.13
SMA
2" FEMALE THREAD ADAPTER
SKU: 900-AS200A
2" Polypropylene Female Thread Cam Coupler Adapter
In stock, 35 units
2" Polypropylene Female Thread Cam Coupler Adapter
Sale price$4.89
SMA
2" FEMALE THREAD ADAPTER
SKU: 909-200A
Male Adapter, Size 2 Inches, Female Thread Connection, Material of Construction Polypropylene, Max Pressure 125 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings, Polypropylene. Banjo Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Feature stainless steel rings, arms, and pins. Meet ASTMC 38000 and MIL-C-27487F specifications. Maximum pressure: 100 PSI at 0 F; 125 PSI at 70 F; 70 PSI at 150 F Temp. range: -30 to 150 F Interchangeable with all types of cam-and-groove couplers EPDM gasket.
In stock, 1303 units
Male Adapter, Size 2 Inches, Female Thread Connection, Material of Construction Polypropylene, Max Pressure 125 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings, Polypropylene. Banjo Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Feature stainless steel rings, arms, and pins. Meet ASTMC 38000 and MIL-C-27487F specifications. Maximum pressure: 100 PSI at 0 F; 125 PSI at 70 F; 70 PSI at 150 F Temp. range: -30 to 150 F Interchangeable with all types of cam-and-groove couplers EPDM gasket.
Sale price$7.72
SMA
2" FEMALE THREAD COUPLER
SKU: 900-AS200D
2" Polypropylene Female Thread Coupler with stainless steel arms
Only 1 unit left
2" Polypropylene Female Thread Coupler with stainless steel arms
Sale price$11.27
SMA
2" FEMALE THREAD COUPLER
SKU: 909-200D
This Banjo 200D cam and groove style fitting is made of polypropylene and has a 2 inch female cam coupler connection on one end and a female NPT connection on the other. The female cam-locking coupler connects to a male grooved adapter and the female National Pipe Taper (NPT) threads connect to male NPT threads. The NPT threads create a tighter seal than straight threads. It is made of polypropylene which can be sterilized, has dimensional stability, and is resistance to most chemicals. This cam and groove style fitting has a maximum operating pressure of 125 pounds per square inch PSI, meets military standard MS27019 for quality assurance, and is suitable for use in commercial or industrial flow systems, such as water transport.
In stock, 755 units
This Banjo 200D cam and groove style fitting is made of polypropylene and has a 2 inch female cam coupler connection on one end and a female NPT connection on the other. The female cam-locking coupler connects to a male grooved adapter and the female National Pipe Taper (NPT) threads connect to male NPT threads. The NPT threads create a tighter seal than straight threads. It is made of polypropylene which can be sterilized, has dimensional stability, and is resistance to most chemicals. This cam and groove style fitting has a maximum operating pressure of 125 pounds per square inch PSI, meets military standard MS27019 for quality assurance, and is suitable for use in commercial or industrial flow systems, such as water transport.
Sale price$21.65