BALE SPEARS & BUSHINGS

26 products

Showing 1 - 24 of 26 products
View
U BOLT 5/8"X3-1/8"X5" OAL SQ CPT
PRO-LINK, INC. U BOLT 5/8"X3-1/8"X5" OAL SQ CPT SKU: 925-S583183CPT
Includes 2 each 5/8-11 ZP Nuts and 5/8" ZP Lockwashers.
Sale price$6.28
Sold out
SLEEVE FOR 85857 STABILIZER SPEAR
AGMATE SLEEVE FOR 85857 STABILIZER SPEAR SKU: 023-85858
2.875" Long, 1.73" OD, 5/16" pin hole. Fits 85857 spear.
Sale price$7.09
In stock, 13 units
STRAIGHT SLEEVE
AGMATE STRAIGHT SLEEVE SKU: CHSS45
Straight sleeve for bale spears. Fits all cross hole 45mm spears.
Sale price$45.29
In stock, 15 units
OPERATOR MANUAL CANISTER 12"X3.5"
AGMATE OPERATOR MANUAL CANISTER 12"X3.5" SKU: 023-67670
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.
Sale price$6.98
In stock, 1990 units
BALE SPEAR MOUNTING BRACKET
FNB c/o DURAMAX INDUSTRIES,FNB c/o GRIPWEL FASTENERS BALE SPEAR MOUNTING BRACKET SKU: 023-49669
Bale spear bolt on bracket. Square base. Steel plate with 4 holes, 4" long welded on sleeve, 5/8" u-bolts, 12mm hex bolt, nuts and washers. Fits all cross hole type 42mm spears.
Sale price$44.14
In stock, 312 units
STABILIZER SPEAR 17"L, 1.25" DIA
AGMATE STABILIZER SPEAR 17"L, 1.25" DIA SKU: 023-85857
Stabilizer bar 17” Long x 1.25” Diameter and 5/16" Pin Hole. Made with C1045 Cold Rolled Steel. Uses 85858 Sleeve.
Sale price$16.19
Sold out
SLEEVE FOR PIN-ON BALE SPEAR-6"
AGMATE SLEEVE FOR PIN-ON BALE SPEAR-6" SKU: 023-49670
2.52 Inch OD, 1.69 Inch ID, 6 Inch long sleeve for pin-on bale spear with cross hole for 1/2 Inch bolt.
Sale price$15.54
In stock, 67 units
BALE SPEAR PIN-ON 48" L X 45MM
AGMATE BALE SPEAR PIN-ON 48" L X 45MM SKU: 023-4845CH
Bale spear. 48" long, 1.77" (45mm) diameter with cross hole. Rated at 3,700 lbs on a 30" load center.
Sale price$180.87
In stock, 11 units
UNIVERSAL HAY BALE COUNTER
FARMSTEAD PRODUCTS CO. UNIVERSAL HAY BALE COUNTER SKU: 519-50023
Farmstead Universal Bale Counter. Retail ready clamshell package.
Sale price$24.54
In stock, 18 units
CONE NUT FOR BALE SPEAR M28
AGMATE CONE NUT FOR BALE SPEAR M28 SKU: 023-52029
Used on 44119, 61413, 61414 and 83120 spears. Thread size is 28mm and pitch is 1.5mm.
Sale price$5.36
In stock, 24 units
CONE NUT FOR BALE SPEAR M22
AGMATE CONE NUT FOR BALE SPEAR M22 SKU: 023-52028
Used on 49664, 49665, 51444 bale spears.
Sale price$4.47
In stock, 10 units
SLEEVE FOR PIN-ON BALE SPEAR-4"
FNB c/o DURAMAX INDUSTRIES SLEEVE FOR PIN-ON BALE SPEAR-4" SKU: 023-49668
Over-All-Length 4 Inches (102 mm), Outside Diameter 2.52 Inches (64 mm), Inside Diameter 1.66 Inches (42mm) with 0.51 Inch (13 mm) Pin Hole Located 1.45 Inches (37 mm) from End. Weight 3.0 lb.
Sale price$14.89
In stock, 190 units
TAPERED BUSHING-HD BALE SPEARS
AGMATE TAPERED BUSHING-HD BALE SPEARS SKU: 023-77881
Bushing Used on Bale Spear 77880, 4800 lb Capacity. ID is 1.3" Small End, 2" Large End, OD is 2.76", 6.7" Long.
Sale price$35.69
In stock, 9 units
BUSHING FOR 39" & 43" BALE SPEARS
AGMATE BUSHING FOR 39" & 43" BALE SPEARS SKU: 023-49666
Tapered sleeve for bale spears. Fits all tapered 36mm spears. 5.70" long, 2.01" diameter, 1.05 X 1.44 tapered inside diameter.
Sale price$23.21
Sold out
BUSHING FOR 38MM SPEARS
AGMATE BUSHING FOR 38MM SPEARS SKU: 023-52080
O/A LENGTH(4.33 Inch), O/A DIA.(1.77 Inch), ID 1.02 Inch x 1.39 Inch (TAPERED INSIDE)
Sale price$16.19
In stock, 10 units
BALE SPEAR PIN-ON 3200# CAP
AGMATE BALE SPEAR PIN-ON 3200# CAP SKU: 023-49667
Your hay hauling equipment becomes useless when it has broken spears. Replace these to keep your machine running with this 47 x 1-5/8 inch bolt-on bale spear that is built to be screwed or welded onto your bale mover. This model is heat treated to resist wear and tear and can hold up to 3, 234 lb. bundles. We also offer its corresponding bushing.
Sale price$74.56
In stock, 121 units
BALE SPEAR PIN-ON 32"(42MM) DIAMETER
AGMATE BALE SPEAR PIN-ON 32"(42MM) DIAMETER SKU: 023-69122
BALE SPEAR PIN-ON 32 Inch, (27 Inch USABLE) (42MM) DIAMETER, 14MM PIN HOLE, 3234 LBS MAXIMUM LOAD CAPACITY
Sale price$119.82
In stock, 11 units
BALE SPEAR WITH NUT- 4500# CAP
AGMATE BALE SPEAR WITH NUT- 4500# CAP SKU: 023-77880
49-1/4 Inch overall length Diameter is 50mm. 4500 lbs cap. The Bushing is # 77881.
Sale price$129.94
Only 2 units left
BALE SPEAR W/NUT 49.25"x1.77"-45MM
AGMATE BALE SPEAR W/NUT 49.25"x1.77"-45MM SKU: 023-44119
49-1/4" overall length including 2" of thread. Diameter is 45mm, 3500 lbs. capacity. The nut is part# 52029.
Sale price$90.94
In stock, 271 units
BALE SPEAR WITH NUT-3500# CAP
AGMATE BALE SPEAR WITH NUT-3500# CAP SKU: 023-83120
43" overall length including 2" of thread. Diameter is 45mm, 3500 lbs. cap. The nut is part# 52029.
Sale price$88.21
Sold out
BALE SPEAR WITH NUT-1800# CAP
AGMATE BALE SPEAR WITH NUT-1800# CAP SKU: 023-49665
43" Long x 36mm Diameter. Includes 52028 Nut. Sleeve is 49666.
Sale price$51.94
Sold out
BALE SPEAR W/NUT-3500# CAP
AGMATE BALE SPEAR W/NUT-3500# CAP SKU: 023-61414
Worn down and broken spears on your hay equipment are an easy fix to keep your machine running. This 39 inch tapered bale spear comes complete with a nut and can hold up to 3, 500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing.
Sale price$79.76
In stock, 7 units
BALE SPEAR WITH NUT-1800# CAP
AGMATE BALE SPEAR WITH NUT-1800# CAP SKU: 023-49664
This hay bale spear is ribbed to provide better grip on your hay bales. The bale spear is 39 inches long and 36 mm at its maximum diameter. Once installed the spear has 34 inches of usable length. The maximum working load is 1, 870 lbs.
Sale price$50.25
In stock, 29 units
BALE SPEAR WITH NUT-3500# CAP
AGMATE BALE SPEAR WITH NUT-3500# CAP SKU: 023-61413
Broken or worn out bale spears on your hay hauling equipment can be easily replaced to keep your machine running. This 32 inch tapered bale spear comes complete with a nut and can hold up to 3, 500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing.
Sale price$64.42
Only 5 units left

Recently viewed