SMA

SMA

Showing 9985 - 10008 of 12445 products

SMA RIM 16.5X9.75 8 BOLT SKU: W65760
Rim with valve guard, 16.5" x 9.75", 8 bolt holes, 8" bolt circle, 6" pilot hole, 3.687" offset, 6000 lbs. capacity. Painted Industrial Orange. Used on Bobcat 700, 800 series with standard wheels.

$109.06

Sold out

SMA RIM 16.5X9.75 8 BOLT SKU: W664260
Rim with valve guard, 16.5" x 9.75", 8 bolt holes, 8" bolt circle, 6" pilot hole, 1.250" offset, 6000 lbs. capacity. Painted Industrial Yellow.

$313.61

In stock, 28 units

SMA RIM 16X8 8 BOLT SKU: W60355
Size 16" x 8", eight bolt holes, 8" bolt circle, 6" pilot hole, 1.125" offset, .850" 90 degree bolt hole, 5500 pounds capacity, outside valve location.

$256.98

In stock, 30 units

SMA RIM 19X4.00 5 BOLT SKU: 9N1015A
Front wheel, five lug. 9-3/4" center hole. Wheel uses 4.00" x 19" tire. Tractors: 9N, 2N, (1939-1947).

Only 1 unit left

SMA RIM 19X4.00 6 BOLT SKU: 8N1015A
Front wheel, six lug. 4-9/16" center hole. Wheel uses 4.00" x 19" tire. Tractors: 8N (1948 to 1952).

Sold out

SMA RIM 9X28 6 CLAMP SKU: TR928
Rim, 9" x 28" wide base demountable rim with six loop clamps. Fits tire size 11.2" x 28".

$161.86

Only 4 units left

SMA RIM BOLT SKU: 370938S36
Bolt, rear rim center disc to rim, for 28" wheels. 5/8"-18 x 2-3/4", CGH head.

$8.70

In stock, 1934 units

SMA Rim Nut SKU: 574-463
Brass Rim Nut for Air/Water Tractor Valve

$1.16

In stock, 60 units

SMA RIM STOP SCREW SKU: 1751403M1
Screw, for stop body 503676M1. Use with power adjust rims 535452M91, 535453M91 and 1687615M91.

$9.84

In stock, 18 units

SMA RING SKU: 897493M1
Piston ring, .98" dia. hydraulic lift pump, 2 required on piston 1860038M1.

Sold out

SMA RING SKU: 897564M1
Piston Rings, for 3-1/8" dia. hydraulic lift piston 897561M91, 3 required. These rings will not work on new style piston 1665737M91.

$7.11

In stock, 15 units

SMA RING GEAR SKU: 9N6384
Starter flywheel ring gear, 134 teeth. Tractors: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000, 4000 (1939 to 1964).

$20.87

In stock, 84 units

SMA RING SET SKU: 2N6149G1
Rings, std 3-3/16" bore, chrome top ring, 2 at 3/32" & 2 at 5/32".

$87.85

Only 1 unit left

SMA RING SET SKU: 8N6149A5
Rings, 3-3/16" standard bore, 2 at 3/32", 1 at 3/16".

$46.35

Only 1 unit left

SMA RING SET SKU: 8N6149G1
Piston ring set. Chrome top ring, 3-3/16" standard bore, 2 at 3/32", 1 at 3/16". 1 used per engine.

$75.09

Sold out

SMA RING SET SKU: 9N6149A
Rings, chrome top ring. 3-3/16" standard bore, 2 at 3/32", 1 at 5/32.

$69.04

Only 5 units left

SMA RING SET SKU: C5NN6149AA
Ring set, 3.9" bore, 3 at 3/32", & 2 at 3/16".

$117.86

Only 3 units left

SMA RING SET 1 CYL SKU: 836325M91
ALLIS CHALMERS: Ring set for 1 piston, used with CAST sleeves only. 2 at 3/32 inch, 1 at 1/8 inch, and 2 at 1/4 inch. 3 used in AD3-152 3 cylinder Perkins diesel engine. MASSEY FERGUSON: Ring set, for 1 piston, used with CAST sleeves only. 2 at 3/32 inch, 1 at 1/8 inch, and 2 at 1/4 inch.

$32.70

In stock, 11 units

SMA RING SET 1 CYL SKU: 836583M91
Ring set, for 1 piston. Can replace 738404M91 & 745769M91. 3 at 3/32", 2 at 1/4"

$45.77

Only 4 units left

SMA RING SET 1 CYL SKU: X0604B

$50.97

In stock, 14 units

SMA RIPPER POINT FOR KMC AND UNVERFERTH SKU: ATRSPU
1-3/4" AgriTuf Ripper Point with Fin for KMC and Unverferth Rippers. Fits 3/4" shank. Replaces 16-080-282

$85.61

In stock, 1773 units

SMA RIPPER POINT FOR UNVERFERTH SKU: 972-U64322B
For Ripper-Stripper, fits shank tip #65117.

$36.56

In stock, 245 units

SMA RIPPER PT W/CHROME 1" BIG-ED SKU: 2179-17BE100CR

$34.11

In stock, 12 units

SMA RIPPLE COULTER 16" 4MM-YETTER SKU: 845-R16402
16" x 4mm Ripple Coulter. Has 4" center hole and 4 holes for 1/2" bolts on 5-1/4" circle. Will replace Yetter 2571-161

$36.56

In stock, 223 units

Previous Page 417 / 519Next

Main menu

Recover password

Create my account

Recently viewed