SMA
1/2" 2 WIRE HYD. HOSE 300FT
SKU: 192-2SN08
Hydraulic Hose 1/2" SAE 100R2AT, 2-wire braids, abrasion and flame resistant thin cover, MSHA approved. Working pressure 4000 PSI, minimum burst pressure 16,000 PSI, 7" minimum bend radius, 300 ft. per reel.
In stock, 3035 units
Hydraulic Hose 1/2" SAE 100R2AT, 2-wire braids, abrasion and flame resistant thin cover, MSHA approved. Working pressure 4000 PSI, minimum burst pressure 16,000 PSI, 7" minimum bend radius, 300 ft. per reel.
Sale price$3.06
SMA
1/2" 3-Outlet Brass Valve
SKU: 400-21421
Has 1/2" NPTM inlet, 1/2" NPTF outlets (3) and 1/4" NPTF gauge port. (0 - 600 PSI)
Sold out
Has 1/2" NPTM inlet, 1/2" NPTF outlets (3) and 1/4" NPTF gauge port. (0 - 600 PSI)
Sale price$0
SMA
1/2" 6 X 25 WIRE ROPE 100 FT
SKU: 329-WR12
The 6x25 wire rope possesses the best combination of flexibility and wear resistance in the 6x19 Class due to the filler wires, providing support and imparting stability to the strand. The fiber core center is made of either natural fibers or polypropylene and offers superior flexibility. 6X19 Class (often referred to as 6X25) rope has six strands with 16 to 26 wires per strand. Wire ropes with a greater number of individual wires (6X37) provide more flexibility and fatigue resistance while ropes with fewer wires (6X19) provide greater abrasion resistance, less flexibility, and more inchstiffness inch. Independent wire rope core (IWRC) ropes have superior crush resistance and strength over fiber core wire ropes, but offer less flexibility.
Sold out
The 6x25 wire rope possesses the best combination of flexibility and wear resistance in the 6x19 Class due to the filler wires, providing support and imparting stability to the strand. The fiber core center is made of either natural fibers or polypropylene and offers superior flexibility. 6X19 Class (often referred to as 6X25) rope has six strands with 16 to 26 wires per strand. Wire ropes with a greater number of individual wires (6X37) provide more flexibility and fatigue resistance while ropes with fewer wires (6X19) provide greater abrasion resistance, less flexibility, and more inchstiffness inch. Independent wire rope core (IWRC) ropes have superior crush resistance and strength over fiber core wire ropes, but offer less flexibility.
Sale price$272.38
SMA
1/2" 90 RESTRICTOR
SKU: 478-150108R
Hydraulic Adapters - Swivel Restrictor - Adapter-Male Pipe to Female Pipe - 1/32 inch Orifice - 90 Degree - 1/2 inch NPT Male and 1/2 inch NPT Female.
In stock, 20 units
Hydraulic Adapters - Swivel Restrictor - Adapter-Male Pipe to Female Pipe - 1/32 inch Orifice - 90 Degree - 1/2 inch NPT Male and 1/2 inch NPT Female.
Sale price$8.48
SMA
1/2" AGSMART ISO HYD TIP-CLAMSHELL
SKU: 826-AS714
Ball-type QC Nipple- ISO - 1/2 inch FPT
In stock, 1131 units
Ball-type QC Nipple- ISO - 1/2 inch FPT
Sale price$8.13
SMA
1/2" BANJO BALL VALVE
SKU: 909-V050
1/2 Thread, 1/2 Ball Opening, 150 PSI @ 70 F1/2 Thread, 1/2 Ball Opening, 150 PSI @ 70 F
In stock, 9 units
1/2 Thread, 1/2 Ball Opening, 150 PSI @ 70 F1/2 Thread, 1/2 Ball Opening, 150 PSI @ 70 F
Sale price$45.75
SMA
1/2" BARBED TEE-BLACK POLY
SKU: 920-T12
POLY HOSE FITTING-BLACK 1/2" BARBED TEE Qty: (1 pc)
In stock, 120 units
POLY HOSE FITTING-BLACK 1/2" BARBED TEE Qty: (1 pc)
Sale price$1.26
SMA
1/2" BLACK POLY HOSE MENDER
SKU: 909-HM050
Black Polypropylene Hose Mender for 1/2" Hose
In stock, 189 units
Black Polypropylene Hose Mender for 1/2" Hose
Sale price$1.70
SMA
1/2" BLACK POLY PIPE TEE
SKU: 909-TEE050
This Banjo TEE050 tee is a schedule 80 polypropylene pipe fitting with three 1/2 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 151 units
This Banjo TEE050 tee is a schedule 80 polypropylene pipe fitting with three 1/2 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$4.60
SMA
1/2" BRASS "L" BODY W/NUT (NON-TEEJET)
SKU: 878-9191A531TD
(NOT TeeJet PARTS) Brass Hose Shank Nozzle - 1/2 inch Single Elbow
In stock, 152 units
(NOT TeeJet PARTS) Brass Hose Shank Nozzle - 1/2 inch Single Elbow
Sale price$7.38
SMA
1/2" BRASS "T" BODY W/NUT(NOT TEEJET)
SKU: 878-9192A531TD
Brass Hose Shank Nozzle - 1/2 inch Double Barb
In stock, 11 units
Brass Hose Shank Nozzle - 1/2 inch Double Barb
Sale price$7.12
SMA
1/2" BRASS BARBED SPLICER
SKU: 928-735
Brass Barbed Hose Splicer with 1/2" Hose Barb Size - Order Multiples of 5.
In stock, 69 units
Brass Barbed Hose Splicer with 1/2" Hose Barb Size - Order Multiples of 5.
Sale price$4.17
