AGMATE

Showing 25 - 48 of 57 products

AGMATE BUSHING FOR 39" & 43" BALE SPEARS SKU: 023-49666
Tapered sleeve for bale spears. Fits all tapered 36mm spears. 5.70" long, 2.01" diameter, 1.05 X 1.44 tapered inside diameter.

$23.21

Sold out

AGMATE CONE NUT FOR BALE SPEAR M22 SKU: 023-52028
Used on 49664, 49665, 51444 bale spears.

$4.56

In stock, 13 units

AGMATE CONE NUT FOR BALE SPEAR M28 SKU: 023-52029
Used on 44119, 61413, 61414 and 83120 spears. Thread size is 28mm and pitch is 1.5mm.

$5.46

In stock, 50 units

AGMATE CULTIVATOR FLAT BRG SHIELD SKU: 332-2520
Flat Bearing Shield - use Bearings 205PPB7 - use Flanges 52MST

$4.12

In stock, 79 units

AGMATE CULTIVATOR INNER BRG SHIELD SKU: 332-2510
Inner Bearing Shield - use Bearings 205PPB7 - use Flanges 52MST

$3.93

In stock, 206 units

AGMATE CULTIVATOR OUTER BRG SHIELD SKU: 332-2530
Outer Bearing Shield - use Bearings 205PPB7 - use Flanges 52MST

$3.98

In stock, 268 units

AGMATE DISC END WASHER SPRING STEEL SKU: 864-90540
7" diameter x 3/8" thick. Hole is for 1-1/4" sq and 1-1/2" rd axles. Made from 65Mn. High carbon, high manganese spring steel.

$30.77

In stock, 6 units

AGMATE DISC END WASHER-SPRING STEEL SKU: 864-90537
7" diameter x 3/8" thick. Hole is for 1" sq and 1-1/8" sq axles. Made from 65Mn. High carbon, high manganese spring steel.

$27.66

In stock, 6 units

AGMATE DISC END WASHER-SPRING STEEL SKU: 864-90538
7" diameter x 3/8" thick. Hole is for 1-1/2" sq axle. Made from 65Mn. High carbon, high manganese spring steel.

$32.44

In stock, 27 units

AGMATE DISC END WASHER-SPRING STEEL SKU: 864-90539
7" diameter x 3/8" thick. Hole is for 1-3/4" rd axle. Made from 65Mn. High carbon, high manganese spring steel. Fits Sunflower, Landoll, Krause, Great Plains. Will Replace Sunflower SN2723B, Landoll 140469, Great Plains 804-200C.

$32.44

In stock, 38 units

AGMATE DISC SPOOL 2-3/8" LONG-1"SQ AXLE SKU: 864-CFG7

$16.59

In stock, 16 units

AGMATE DISC SPOOL 3-5/8" LONG 1" SQ AXLE SKU: 864-CFG8

$15.65

In stock, 24 units

AGMATE DISC SPOOL 5-1/8" LONG 1" SQ AXLE SKU: 864-CFG9

$24.91

In stock, 13 units

AGMATE DISC SPOOL 7-1/2" SPOOL FOR 1" SQ AXLE SKU: 864-CFG5
Utility disc harrow spool. 7-1/2" long for 1" square axle.

$21.59

In stock, 27 units

AGMATE END WASHER FOR 1" SQ AXLE 85201 SKU: 864-CFG3

$7.20

In stock, 105 units

AGMATE HUB 1-3/8" 6 SPLINE FOR SLIP CLUTCH SKU: 442-32489
OD is 5.51", height is 3.15".

$278.46

Only 2 units left

AGMATE KMC BOOTED SUBSOILER POINT SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.

$33.22

Sold out

AGMATE KMC BOOTED SUBSOILER POINT SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075

$27.12

In stock, 46 units

AGMATE LANDSCAPE RAKE TINE SKU: 023-46796
•LRAK08 - 32mm x 10mm HD Landscape Rake tine. Two hole Rake tine 13/32" dia type 2 holes. •High strength 5160 steel heat treated to 38-42 rockwell

$23.02

Sold out

AGMATE LANDSCAPE RAKE TINE (ONE HOLE) SKU: 023-10454
One Hole Landscape Rake Tine 1” x 5/16”. These Rake Tines are Made of 5160 Material and Heat Treated to 36.5 RC Hardness. Will fit Dale Phillips, Alamo, J-Bar, Ag-Meier and Howse

$7.87

In stock, 166 units

AGMATE LANDSCAPE RAKE TINE (TWO HOLE) SKU: 023-33913
This is a 2-hole landscape rake tine. Each rake tine measures 1 inch x 5/16 inch and has a 3/8 inch bolt hole It features two holes on one end of the tine. 5160 Steel. Heat treated to 38-42 Rockwell,

$8.18

In stock, 95 units

AGMATE OPERATOR MANUAL CANISTER 12"X3.5" SKU: 023-67670
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.

$7.05

In stock, 1767 units