TOOL BAR & BOX BLADE
40 products
Showing 25 - 40 of 40 products
Display
View
SAM STEVENS INC
1 X 3 X 34" SHANK W/FT PC
SKU: 509-SF134
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
In stock, 36 units
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
Sale price$92.79
SAM STEVENS INC
1X3X30" SHANK W/FP1 FOOT PIECE
SKU: 509-SF130
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
In stock, 263 units
All of our Toolbar Shanks are manufactured from C1080-high carbon steel. Our shanks are drilled, not heated and punched, to assure that the temper of the steel is not lost in the heating process and even very long sweeps run level.
Sale price$112.72
NORWEST MANUFACTURING
FOOTPIECE W/PLATE FRONT&REAR
SKU: 509-FP1F
Fits 1"x3" shank. 4" C-C hole spacing, 3/8" steel all welded footpiece.
In stock, 72 units
Fits 1"x3" shank. 4" C-C hole spacing, 3/8" steel all welded footpiece.
Sale price$74.43
NORWEST MANUFACTURING
FOOTPIECE FOR 1"X3" SHANK
SKU: 509-FP1
1" X 3" Footpiece for toolbar shank, 3/8" steel all welded footpiece, Fits Hamby, Roll-A-Cone, C&J.
In stock, 40 units
1" X 3" Footpiece for toolbar shank, 3/8" steel all welded footpiece, Fits Hamby, Roll-A-Cone, C&J.
Sale price$73.84
FNB c/o YERIK INTERNATIONAL
BOX BLADE SHANK W/PT-REAR NOTCH
SKU: 873-103109
15.7" rear-notched shank with crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Atlas.
In stock, 7 units
15.7" rear-notched shank with crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Atlas.
Sale price$40.98
FNB c/o YERIK INTERNATIONAL
BOX BLADE SHANK W/PT-FRT NOTCH
SKU: 873-103110
17.5" front 3 notch shank with crimped-on point. Shank is 3/4" thick, 2-1/2" wide. Upper slot is 3-5/8" from top, and bottom slot is 7-1/8" from top. Shank and point are heat-treated. Fits Modern and Hardee.
In stock, 104 units
17.5" front 3 notch shank with crimped-on point. Shank is 3/4" thick, 2-1/2" wide. Upper slot is 3-5/8" from top, and bottom slot is 7-1/8" from top. Shank and point are heat-treated. Fits Modern and Hardee.
Sale price$48.40
FNB c/o YERIK INTERNATIONAL
CRIMP-ON POINT-BOX BLADE SHANK
SKU: 873-2638
Heat treated and painted.
In stock, 1909 units
Heat treated and painted.
Sale price$5.60
WEAR-TEK (DYKO)
BIG OX POINT- BOTTOM/NOSE CAP
SKU: 693-2D5BE
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Cast Alloy Point with Full Bottom and Nose Cap
In stock, 87 units
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Cast Alloy Point with Full Bottom and Nose Cap
Sale price$74.36
WEAR-TEK (DYKO)
BIG OX POINT-DUCTILE IRON
SKU: 693-2D5
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Ductile iron.
In stock, 30 units
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Ductile iron.
Sale price$58.38
FNB c/o YERIK INTERNATIONAL
BENT HITCH PIN 1/2"X3" USABLE
SKU: 873-7111
Hitch Pin 1/2" x 3" Usable Length Qty: (1 Pc)
In stock, 2035 units
Hitch Pin 1/2" x 3" Usable Length Qty: (1 Pc)
Sale price$2.87
Filters (0)
Main menu