SMA
3" BALL VALVE FULL PT
SKU: 900-ASV300FP
3 Thread, 3 Ball Opening, Full Port, 100 PSI @ 70 F
In stock, 53 units
3 Thread, 3 Ball Opening, Full Port, 100 PSI @ 70 F
Sale price$118.27
SMA
3" BANJO BALL VALVE
SKU: 909-V300
3 Thread, 2-1/2 Ball Opening, 100 PSI @ 70 F
In stock, 49 units
3 Thread, 2-1/2 Ball Opening, 100 PSI @ 70 F
Sale price$143.01
SMA
3" BANJO BALL VALVE FULL PT
SKU: 909-V300FP
The Banjo V300FP three-piece, full port ball valve has a lever handle and NPT female threads on both ends. The body is fiberglass-reinforced polypropylene for strength and resistance to chemicals and has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and to reduce the risk of leakage. It has a lever handle for manual on/off control. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has 3 inch female National Pipe Taper (NPT) threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 100 pounds per square inch (PSI, and the maximum temperature rating is 150 degrees F.
In stock, 181 units
The Banjo V300FP three-piece, full port ball valve has a lever handle and NPT female threads on both ends. The body is fiberglass-reinforced polypropylene for strength and resistance to chemicals and has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and to reduce the risk of leakage. It has a lever handle for manual on/off control. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has 3 inch female National Pipe Taper (NPT) threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 100 pounds per square inch (PSI, and the maximum temperature rating is 150 degrees F.
Sale price$212.29
SMA
3" BLACK POLY ELBOW 90 DEG
SKU: 909-EL30090
This Banjo EL300-90 90-degree elbow is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The 90-degree elbow fitting, or "ell", connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 36 units
This Banjo EL300-90 90-degree elbow is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The 90-degree elbow fitting, or "ell", connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$60.11
SMA
3" BLACK POLY HOSE MENDER
SKU: 909-HM300
Precision Molded to fit specifically into hoses. 3" Hose Shank/ 3" Hose Shank. Fiberglass Reinforced. Lightweight. Corrosion Resistant. Excellent Chemical Resistance.
In stock, 72 units
Precision Molded to fit specifically into hoses. 3" Hose Shank/ 3" Hose Shank. Fiberglass Reinforced. Lightweight. Corrosion Resistant. Excellent Chemical Resistance.
Sale price$17.72
SMA
3" BLACK POLY PIPE CAP
SKU: 909-CAP300
This Banjo CAP300 cap is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The cap fitting closes or terminates the end of a pipe or fitting. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Only 3 units left
This Banjo CAP300 cap is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The cap fitting closes or terminates the end of a pipe or fitting. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$43.03
SMA
3" BLACK POLY PIPE COUPLING
SKU: 909-CPLG300
This Banjo CPLF300 coupling is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The coupling fitting connects two pipes with the same diameter going in the same direction to extend a straight run. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 76 units
This Banjo CPLF300 coupling is a schedule 80 polypropylene pipe fitting with 3 inch female NPT threads. The coupling fitting connects two pipes with the same diameter going in the same direction to extend a straight run. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$37.43
SMA
3" BLACK POLY PIPE TEE BANJO
SKU: 909-TEE300
This Banjo TEE300 tee is a schedule 80 polypropylene pipe fitting with three 3 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 66 units
This Banjo TEE300 tee is a schedule 80 polypropylene pipe fitting with three 3 inch female NPT threaded connections. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. inchA inch and inchB inch indicate the main run on the fitting, and inchC inch indicates the branch. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$66.86
SMA
3" BLACK POLY SEDIMENT STRAINER
SKU: 887-73590
Black Plastic Sediment Strainer
In stock, 44 units
Black Plastic Sediment Strainer
Sale price$12.13
SMA
3" CHIP BRUSH
SKU: 137-16023
3" Chip Brush with white bristles and plain wood handle - 3/8" thick - 1 1/2" long - Order multiples of 12.
In stock, 27 units
3" Chip Brush with white bristles and plain wood handle - 3/8" thick - 1 1/2" long - Order multiples of 12.
Sale price$1.30
SMA
3" CIRCULAR END BRUSH
SKU: 349-182040B
Replaces Weiler part# 36011
In stock, 33 units
Replaces Weiler part# 36011
Sale price$6.11
SMA
3" CLOSE BLACK POLY NIPPLE
SKU: 909-NIP300SH
Banjo NIP300SH Nipple, Pipe Size 3 Inches; Connection MPT; Color Black; Temp. Range -20 to 150 Deg F; Length Short; Material of Construction Polypropylene; Max. Pressure 150 at 70 Deg F PSI; Schedule 80.
In stock, 139 units
Banjo NIP300SH Nipple, Pipe Size 3 Inches; Connection MPT; Color Black; Temp. Range -20 to 150 Deg F; Length Short; Material of Construction Polypropylene; Max. Pressure 150 at 70 Deg F PSI; Schedule 80.
Sale price$14.44
SMA
3" CRIMP STYLE CUP BRUSH
SKU: 349-188010
Replaces Weiler part# 36031
Only 2 units left
Replaces Weiler part# 36031
Sale price$10.99
SMA
3" CUT OFF WHEELS 2 PER CARD FOR M563DB
SKU: 975-M579C
Designed to cut through sheet metal, muffler clamps, hose clamps, rusted bolts, etc.for performance Tool item M563DB.
In stock, 13 units
Designed to cut through sheet metal, muffler clamps, hose clamps, rusted bolts, etc.for performance Tool item M563DB.
Sale price$3.20
SMA
3" EPDM GASKET BANJO
SKU: 909-300G
Gasket, Size 3 In, Material of Construction EPDM, Max Pressure 75 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meet ASTMC 38000 and MIL-C-27487F specifications.
In stock, 1413 units
Gasket, Size 3 In, Material of Construction EPDM, Max Pressure 75 PSI, Gasket Material: EPDM, Standards MS27019 Cam and Groove Couplings. Couplings have Buna N seals and stainless steel pins. Pull rings and locking pins are plated carbon steel. Meet ASTMC 38000 and MIL-C-27487F specifications.
Sale price$1.56