SMA
2"X1-1/2" POLY REDUCER COUPLING
SKU: 909-RC200150
This Banjo RC200-150 reducing coupling is a schedule 80 polypropylene pipe fitting with 2 inch and 1-1/2 inch female NPT threaded connections. The reducing coupling has one end smaller than the other for connecting two pipes with different diameters. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
In stock, 92 units
This Banjo RC200-150 reducing coupling is a schedule 80 polypropylene pipe fitting with 2 inch and 1-1/2 inch female NPT threaded connections. The reducing coupling has one end smaller than the other for connecting two pipes with different diameters. It has female National Pipe Taper (NPT) threads for connecting to male NPT threaded pipes, creating a tighter seal than straight threads. This fitting is precision molded in polypropylene, which resists most chemicals, has excellent dimensional stability, and is sterilizable. In addition, it is reinforced with fiberglass for added durability, strength, and chemical resistance. The fitting is suitable for handling pressures up to 150 pounds per square inch PSI at 70 degrees F. This schedule 80 (thick wall) fitting is suitable for higher pressure than a schedule 40 fitting. This fitting is suitable for use in a wide variety of liquid handling applications including, but not limited to, fertilizers, industrial chemicals, pharmaceuticals, textiles, and water treatment.
Sale price$12.12
SMA
2"X200PSI RED FRONTIER HOSE
SKU: 380-2X200PSI
Medium Pressure Spray and Multi-Purpose Hose - EPDM Rubber -Red Cover - Order Multiples of 200 ft.
Sold out
Medium Pressure Spray and Multi-Purpose Hose - EPDM Rubber -Red Cover - Order Multiples of 200 ft.
Sale price$10.48
SMA
2"X6" BLACK POLY NIPPLE
SKU: 909-NIP2006
Nipple, Pipe Size 2 In, Connection MNPT, Color Black, Temp. Range 20 to 150 Deg F, Length is 6 In, Material of Construction is Polypropylene, Max. Pressure 150 at 70 Deg F PSI, Schedule 80
In stock, 109 units
Nipple, Pipe Size 2 In, Connection MNPT, Color Black, Temp. Range 20 to 150 Deg F, Length is 6 In, Material of Construction is Polypropylene, Max. Pressure 150 at 70 Deg F PSI, Schedule 80
Sale price$11.38
SMA
2'' 4 BOLT FULL PORT VALVE
SKU: 909-V204FP
Banjo V204FP 2" Full Port Valve MNPT x Male Adapter
In stock, 54 units
Banjo V204FP 2" Full Port Valve MNPT x Male Adapter
Sale price$84.21
SMA
2'' BANJO BALL VALVE
SKU: 909-V200
This Banjo V200 ball valve is made of polypropylene for chemical resistance and less weight than if made from metal and has a standard port flow for a smaller valve size. This three-piece construction inline valve has a lever handle for manual on/off control and 2 inch female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and is rated to 150 pounds per square inch PSI with a maximum operating temperature of 150 degrees F. This full port ball valve is suitable for use in fluid handling applications.
In stock, 468 units
This Banjo V200 ball valve is made of polypropylene for chemical resistance and less weight than if made from metal and has a standard port flow for a smaller valve size. This three-piece construction inline valve has a lever handle for manual on/off control and 2 inch female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It has PTFE (polytetrafluoroethylene) seats for resistance to chemicals, moisture, and high temperatures and is rated to 150 pounds per square inch PSI with a maximum operating temperature of 150 degrees F. This full port ball valve is suitable for use in fluid handling applications.
Sale price$64.81
SMA
2'' CAST IRON BANJO PUMP 6.5 BRIGGS ENG.
SKU: 909-222PI6
Banjo 222PI6PRO 2 inch Cast Iron Self-Priming Pump with 6.5 HP Briggs Stratton Engine Pro Series. Pump Features: Cast iron construction for rugged dependable service. Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Pump end separated from engine. Heavy duty slinger seal on motor shaft. Large weep holes between pump end and engine. V Shaped for quicker priming. 6.5 Briggs & Stratton Intek Motor Features: Cast iron cylinder sleeve. Heavy duty flywheel. Overhead valve. High oil fill. Oil Guard low oil sensor. Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sold out
Banjo 222PI6PRO 2 inch Cast Iron Self-Priming Pump with 6.5 HP Briggs Stratton Engine Pro Series. Pump Features: Cast iron construction for rugged dependable service. Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Pump end separated from engine. Heavy duty slinger seal on motor shaft. Large weep holes between pump end and engine. V Shaped for quicker priming. 6.5 Briggs & Stratton Intek Motor Features: Cast iron cylinder sleeve. Heavy duty flywheel. Overhead valve. High oil fill. Oil Guard low oil sensor. Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sale price$878.58
SMA
2'' CAST IRON PUMP W/ 6.5 HP BRIGGS
SKU: 909-200PI6PRO
Banjo 200PI6PRO 2" Cast Iron Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Cast iron construction for rugged dependable service. Stainless steel shaft sleeve to protect engine shaft. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
In stock, 15 units
Banjo 200PI6PRO 2" Cast Iron Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Cast iron construction for rugged dependable service. Stainless steel shaft sleeve to protect engine shaft. Carbon ceramic seal with stainless steel cup and spring with FKM (Viton® type) rubber. Replaceable inlet and outlet flanges. Dynamically balanced impeller. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sale price$897.70
SMA
2'' F.P. FLANGE X 2'' HOSE BARB 90DEG.
SKU: 909-M220BRB90
Banjo Manifold Fitting. 2" Full Port Flange x 2" 90 Degree Hose Barb. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 24 units
Banjo Manifold Fitting. 2" Full Port Flange x 2" 90 Degree Hose Barb. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$11.15
SMA
2'' FLANGE MNT POLY STRAIN. 50 MESH
SKU: 909-MLS20050
50 Mesh, 316 SS Screen.
In stock, 16 units
50 Mesh, 316 SS Screen.
Sale price$115.02
SMA
2'' FLANGE TEE
SKU: 909-M200TEE
2" Flanged Tee. Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 99 units
2" Flanged Tee. Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$14.79
SMA
2'' FLANGE X 1-1/4''90 DEG. BARB
SKU: 909-M200125BRB90
2" Flange x 1-1/4" 90 Degree Hose Barb. Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 10 units
2" Flange x 1-1/4" 90 Degree Hose Barb. Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$11.15
SMA
2'' FLANGE X 2'' MALE Q.D. ADAPT
SKU: 909-M200A
Banjo M200A Manifold Fitting, 2" Flange x 2" Male Adapter
Only 5 units left
Banjo M200A Manifold Fitting, 2" Flange x 2" Male Adapter
Sale price$9.83
SMA
2'' FP FLANGE X 2'' FEMALE NPT ADAPTER
SKU: 909-M220FPT
Banjo Manifold Fitting. 2" Full Port Flange x 2" Female Pipe Thread. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation. 1" and 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 17 units
Banjo Manifold Fitting. 2" Full Port Flange x 2" Female Pipe Thread. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation. 1" and 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$28.86
SMA
2'' FULL PORT FLANGED TEE
SKU: 909-M220TEE
2 Inch Full Port Flanged Tee. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation, 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 74 units
2 Inch Full Port Flanged Tee. Quick & easy assembly. Easy On/Off hose connections. 360 Degree Orientation, 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$14.79
SMA
2'' FULL TO STD PORT FLNG. REDUCER
SKU: 909-M220200CPG
Banjo Manifold Fitting 2" Full Port Flange x 2" Flange (Reducer Coupling). Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
In stock, 16 units
Banjo Manifold Fitting 2" Full Port Flange x 2" Flange (Reducer Coupling). Positive Seals. Quick & easy assembly. Easy On/Off hose connections. 360 Deg. Orientation. 1" & 2" fittings pressure to 150 PSI @ 70 Deg. F. 3" fittings pressure to 125 PSI @ 70 Deg. F.
Sale price$18.07
SMA
2'' MALE ADAPT. X 2" MALE ADAPT.
SKU: 909-200FF
Spool Adapter, Pipe Size 2 x 2 Inch, Color Black, Length 3 In., Material of Construction Polypropylene, Temp. Range -20 to 150 Deg F, Package Quantity 1, Standards MIL.
In stock, 142 units
Spool Adapter, Pipe Size 2 x 2 Inch, Color Black, Length 3 In., Material of Construction Polypropylene, Temp. Range -20 to 150 Deg F, Package Quantity 1, Standards MIL.
Sale price$22.69
SMA
2'' POLY W/6.5 HP PRO BRIGGS
SKU: 909-200P6PROBUNA
Banjo 200P6PRO 2 inch Polypropylene Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Precision molded construction, lightweight, corrosion resistant, superior design, low maintenance. EPDM elastomers standard, FKM (Viton type) available. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
In stock, 55 units
Banjo 200P6PRO 2 inch Polypropylene Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Precision molded construction, lightweight, corrosion resistant, superior design, low maintenance. EPDM elastomers standard, FKM (Viton type) available. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sale price$594.10
SMA
2'' POLYPRO BALL VALVE
SKU: 900-ASV200
2 Thread, 1.5 Ball Opening, 100 PSI @ 70 F
In stock, 63 units
2 Thread, 1.5 Ball Opening, 100 PSI @ 70 F
Sale price$34.91