SMA - JONESBORO, AR
HIGH ARCH CLIP ADJ JOHN DEERE
SKU: 798-HD625
Will replace JD AH218548.
In stock, 274 units
Will replace JD AH218548.
Sale price$4.78
KONDEX CORPORATION
KNIFE CLIP LOW ARCH STEEL
SKU: 491-KC116
Low Arch Steel Knife Clip for all Combines except those with H-C and Love Floating Headers. Replaces C/IH 613842R1 & 130728C1; DA 71189684 & 71346158; JD H84412 & H127081; and MF 143241M1 & 206195M1.
In stock, 228 units
Low Arch Steel Knife Clip for all Combines except those with H-C and Love Floating Headers. Replaces C/IH 613842R1 & 130728C1; DA 71189684 & 71346158; JD H84412 & H127081; and MF 143241M1 & 206195M1.
Sale price$11.36
HERSCHEL-ADAMS
HOLD DOWN CLIP HI BSH500
SKU: 491-450693
High Arch Steel Knifehead Clip for all Knifeheads except H-C, Love and Versatile - Also used on Twin Point Bolt-on Sections. Replaces C/IH 611759R1 & 595648R1; F/NH 67358; and Hesston 142984.
Sold out
High Arch Steel Knifehead Clip for all Knifeheads except H-C, Love and Versatile - Also used on Twin Point Bolt-on Sections. Replaces C/IH 611759R1 & 595648R1; F/NH 67358; and Hesston 142984.
Sale price$6.98
KONDEX CORPORATION
HOLD DOWN CLIP LO BSL600
SKU: 491-450692
Low Arch Steel for Hay - Riveted or Bolted. Also used on Twin Point Bolt-on Sections. Replaces: DA 232125, 804074, 1116535; C/IH 176722C1, 544274R1, MA812; F/NH -36656, 67357, 137651; GEHL H7542; Hesston 241216; MF 130431M1, 1041469M1, 1055108M1; New Idea 0145HS, 290816.
In stock, 382 units
Low Arch Steel for Hay - Riveted or Bolted. Also used on Twin Point Bolt-on Sections. Replaces: DA 232125, 804074, 1116535; C/IH 176722C1, 544274R1, MA812; F/NH -36656, 67357, 137651; GEHL H7542; Hesston 241216; MF 130431M1, 1041469M1, 1055108M1; New Idea 0145HS, 290816.
Sale price$6.20
CFC DISTRIBUTORS INC
FLEX TINE FOR TEAR DROP BAT
SKU: 142-GF1238
Tear Drop Bat Gentle Finger w/hardware & mounting instructions. Replaces I.H. 197580C (not certain late IHC 820/early 1020 bats), JD 900 Header H127035, D.A. 71345318, M.F., H.C. Order Multiples of 50.
In stock, 400 units
Tear Drop Bat Gentle Finger w/hardware & mounting instructions. Replaces I.H. 197580C (not certain late IHC 820/early 1020 bats), JD 900 Header H127035, D.A. 71345318, M.F., H.C. Order Multiples of 50.
Sale price$1.61
ALBANY MACHINE PRODUCTS
LARGE VISE SCREW
SKU: RCTC501
Large vise screw
Only 4 units left
Large vise screw
Sale price$10.53
FREUDENBERG-NOK GENERAL PARTNERSHIP
SEAL
SKU: 195321M1
Seal for sickle head connector bearing, 2 required. Also used in counterweight except on 41. (C)
In stock, 44 units
Seal for sickle head connector bearing, 2 required. Also used in counterweight except on 41. (C)
Sale price$6.75
PRO-LINK, INC.
U BOLT 5/8"X3-1/8"X5" OAL SQ CPT
SKU: 925-S583183CPT
Includes 2 each 5/8-11 ZP Nuts and 5/8" ZP Lockwashers.
Sold out
Includes 2 each 5/8-11 ZP Nuts and 5/8" ZP Lockwashers.
Sale price$6.46
AGMATE
SLEEVE FOR 85857 STABILIZER SPEAR
SKU: 023-85858
2.875" Long, 1.73" OD, 5/16" pin hole. Fits 85857 spear.
In stock, 56 units
2.875" Long, 1.73" OD, 5/16" pin hole. Fits 85857 spear.
Sale price$7.09
AGMATE
STRAIGHT SLEEVE
SKU: CHSS45
Straight sleeve for bale spears. Fits all cross hole 45mm spears.
In stock, 7 units
Straight sleeve for bale spears. Fits all cross hole 45mm spears.
Sale price$43.29
AGMATE
OPERATOR MANUAL CANISTER 12"X3.5"
SKU: 023-67670
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.
In stock, 1471 units
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.
Sale price$7.05
FNB c/o DURAMAX INDUSTRIES,FNB c/o GRIPWEL FASTENERS
BALE SPEAR MOUNTING BRACKET
SKU: 023-49669
Bale spear bolt on bracket. Square base. Steel plate with 4 holes, 4" long welded on sleeve, 5/8" u-bolts, 12mm hex bolt, nuts and washers. Fits all cross hole type 42mm spears.
In stock, 194 units
Bale spear bolt on bracket. Square base. Steel plate with 4 holes, 4" long welded on sleeve, 5/8" u-bolts, 12mm hex bolt, nuts and washers. Fits all cross hole type 42mm spears.
Sale price$44.14
AGMATE
STABILIZER SPEAR 17"L, 1.25" DIA
SKU: 023-85857
Stabilizer bar 17” Long x 1.25” Diameter and 5/16" Pin Hole. Made with C1045 Cold Rolled Steel. Uses 85858 Sleeve.
Sold out
Stabilizer bar 17” Long x 1.25” Diameter and 5/16" Pin Hole. Made with C1045 Cold Rolled Steel. Uses 85858 Sleeve.
Sale price$16.19
AGMATE
SLEEVE FOR PIN-ON BALE SPEAR-6"
SKU: 023-49670
2.52 Inch OD, 1.69 Inch ID, 6 Inch long sleeve for pin-on bale spear with cross hole for 1/2 Inch bolt.
In stock, 94 units
2.52 Inch OD, 1.69 Inch ID, 6 Inch long sleeve for pin-on bale spear with cross hole for 1/2 Inch bolt.
Sale price$15.54
AGMATE
BALE SPEAR PIN-ON 48" L X 45MM
SKU: 023-4845CH
Bale spear. 48" long, 1.77" (45mm) diameter with cross hole. Rated at 3,700 lbs on a 30" load center.
In stock, 8 units
Bale spear. 48" long, 1.77" (45mm) diameter with cross hole. Rated at 3,700 lbs on a 30" load center.
Sale price$184.25
FARMSTEAD PRODUCTS CO.
UNIVERSAL HAY BALE COUNTER
SKU: 519-50023
Farmstead Universal Bale Counter. Retail ready clamshell package.
In stock, 14 units
Farmstead Universal Bale Counter. Retail ready clamshell package.
Sale price$24.12
AGMATE
CONE NUT FOR BALE SPEAR M28
SKU: 023-52029
Used on 44119, 61413, 61414 and 83120 spears. Thread size is 28mm and pitch is 1.5mm.
In stock, 50 units
Used on 44119, 61413, 61414 and 83120 spears. Thread size is 28mm and pitch is 1.5mm.
Sale price$5.46
AGMATE
CONE NUT FOR BALE SPEAR M22
SKU: 023-52028
Used on 49664, 49665, 51444 bale spears.
In stock, 23 units
Used on 49664, 49665, 51444 bale spears.
Sale price$4.56
FNB c/o DURAMAX INDUSTRIES
SLEEVE FOR PIN-ON BALE SPEAR-4"
SKU: 023-49668
Over-All-Length 4 Inches (102 mm), Outside Diameter 2.52 Inches (64 mm), Inside Diameter 1.66 Inches (42mm) with 0.51 Inch (13 mm) Pin Hole Located 1.45 Inches (37 mm) from End. Weight 3.0 lb.
In stock, 223 units
Over-All-Length 4 Inches (102 mm), Outside Diameter 2.52 Inches (64 mm), Inside Diameter 1.66 Inches (42mm) with 0.51 Inch (13 mm) Pin Hole Located 1.45 Inches (37 mm) from End. Weight 3.0 lb.
Sale price$14.89
AGMATE
TAPERED BUSHING-HD BALE SPEARS
SKU: 023-77881
Bushing Used on Bale Spear 77880, 4800 lb Capacity. ID is 1.3" Small End, 2" Large End, OD is 2.76", 6.7" Long.
In stock, 58 units
Bushing Used on Bale Spear 77880, 4800 lb Capacity. ID is 1.3" Small End, 2" Large End, OD is 2.76", 6.7" Long.
Sale price$35.69
AGMATE
BUSHING FOR 39" & 43" BALE SPEARS
SKU: 023-49666
Tapered sleeve for bale spears. Fits all tapered 36mm spears. 5.70" long, 2.01" diameter, 1.05 X 1.44 tapered inside diameter.
Sold out
Tapered sleeve for bale spears. Fits all tapered 36mm spears. 5.70" long, 2.01" diameter, 1.05 X 1.44 tapered inside diameter.
Sale price$23.21
AGMATE
BUSHING FOR 38MM SPEARS
SKU: 023-52080
O/A LENGTH(4.33 Inch), O/A DIA.(1.77 Inch), ID 1.02 Inch x 1.39 Inch (TAPERED INSIDE)
In stock, 6 units
O/A LENGTH(4.33 Inch), O/A DIA.(1.77 Inch), ID 1.02 Inch x 1.39 Inch (TAPERED INSIDE)
Sale price$16.19